notamondayfan 44 Posted July 10, 2006 hey guys. quick question. when driving my 205, i lift off the accelerator, and the whole car (engine) seems to kangeroo around. am i right in thinking my lower engine mount is shot? if so, does any 1 have the part number for it? thanks, deano! Share this post Link to post Share on other sites
Revla 2 Posted July 10, 2006 hey guys. quick question. when driving my 205, i lift off the accelerator, and the whole car (engine) seems to kangeroo around. am i right in thinking my lower engine mount is shot? if so, does any 1 have the part number for it? thanks, deano! Hi, Could be time for a group N mounting (baker mountings, autofive, pugeot sport etc)?? Trev Share this post Link to post Share on other sites
feb 47 Posted July 10, 2006 I recently changed the top engine and gearbox mounts (bottom mount changed last summer) and kangarooing reduced a lot. You will be surprised at the difference it makes! Share this post Link to post Share on other sites
notamondayfan 44 Posted July 11, 2006 yea i changed my gear box mount a few months bk. so u pretty sure its the lower mount yea? Share this post Link to post Share on other sites
stevec205gti 0 Posted July 11, 2006 It's worth remembering 205's kangaroo badly when you just lift off anyway - have a search for information about the throttle position sensor (TPS) which will tell you more about the kangarooing habits Share this post Link to post Share on other sites
notamondayfan 44 Posted July 11, 2006 ok will do. can any 1 point me in the direction for the engine mount on the parts CD? i cant seem to find it. cheers, dean Share this post Link to post Share on other sites
jim21070 2 Posted July 11, 2006 It's worth remembering 205's kangaroo badly when you just lift off anyway - have a search for information about the throttle position sensor (TPS) which will tell you more about the kangarooing habits They don't when they're properly set up.! It took two years to get mine there though... Share this post Link to post Share on other sites
kyepan 291 Posted July 11, 2006 They don't when they're properly set up.! It took two years to get mine there though... what did you have to do in the end to get it there? Share this post Link to post Share on other sites
notamondayfan 44 Posted July 11, 2006 ok bk on topic, part number on the parts cd any1? Share this post Link to post Share on other sites
jim21070 2 Posted July 11, 2006 what did you have to do in the end to get it there? I'll start a separate topic on how I managed it. It's a long story... Share this post Link to post Share on other sites
notamondayfan 44 Posted July 12, 2006 think ive found it. do i just need part numbered EM043 ? Share this post Link to post Share on other sites
Revla 2 Posted July 12, 2006 Looks good, except I'd go for a group N as peugeot's rubber mounts are softer than the originals...... Share this post Link to post Share on other sites
notamondayfan 44 Posted August 22, 2006 sorry to dig this up, but im still having a slight knocking / jerking when lifting off the accelerator. could the other smaller bush have worn too? i cant seem to find a part number for it anywhere, and had plenty of trouble getting the larger mount last time. thanks, dean Share this post Link to post Share on other sites
