Mi16 Bottom End Bearings Question

[richystran 7 3 Cars]

My bottom end bearings let go on the track on sunday, they didnt cause any harm to the crank shaft luckily.

 

I have a few codes here which i need to get the same ones.

 

Are they standard? There is NO STD written on the bearings, nor is there any oversize etc.

 

Heres the codes

 

34801

05/88 (I take this to be the date of manufacture?)

019042

 

Id anyone knows where i can get them tomorrow with next day delivery this would be appricated. Also is there any compitition ones available?

 

Cheers

 

Richy

[Miles 331 1 Cars]

Deffo the std one's, I would check the crank as they tend to bend when this happen's

[richystran 7 3 Cars]

Cheers miles.

Got t16 bearings for the bottom end. Big problem on con rod 3 though!

The big end has been heated too much and it has ovaled unfortunitly! So its a head off job!

Ill probably have to do a whole bottom end rebuild! Damb!!! This engine is costing me a fortune, anyone know any good supplyiers of parts etc?

 

Cheers

[Miles 331 1 Cars]

You can try our main forum sponser QEP or any local enginering shop should do the trick, I tend to get the cranks ground, Bearings supplied and it's always a good price as your buying the lot from them