Jer309GTi 3 Posted June 24, 2006 I'm in the process of changing the lower engine mount on my XS and got the mount from Pug. The part they gave me was 1809.16 and it's too big to fit in my housing. Does anyone know if the TU and XU lower mounts are the same? This mount is the same size as my 309 GTi lower mount, but it is too big to fit in my TU housing so I'm guessing that XU lower mounts are a slightly bigger diameter than TU mounts. Any help would really be appreciated as the car is off the road now and need it on the road ASAP. Thanks Share this post Link to post Share on other sites
Sam 4 Posted June 24, 2006 TU is smaller, they've probably given you XU. Share this post Link to post Share on other sites
Jer309GTi 3 Posted June 24, 2006 Thanks mate, bloody useless Pug! (no offence if anyone works in Pug parts dept) Share this post Link to post Share on other sites
Guest smokinslim Posted June 25, 2006 How much did it cost you if you don't mind me asking? Last time i asked peugeot they wanted £80+ as they would only sell me one already mounted in the bracket. Got a poly one elsewhere in the endfor about £41 including postage. Standard TU ones aren't exactly what you'd call solid, not sure if the xs has a stronger one than others or not. Share this post Link to post Share on other sites
Jer309GTi 3 Posted June 25, 2006 Haven't a clue how much it was sorry as my Dad got it for me. I think I might as well go for an uprated one. The poly one that you got, was it the smaller one for the TU or an XU one? If it was a TU one, where did you get it from? Share this post Link to post Share on other sites
Rippthrough 98 Posted June 25, 2006 How much did it cost you if you don't mind me asking? Last time i asked peugeot they wanted £80+ as they would only sell me one already mounted in the bracket. Got a poly one elsewhere in the endfor about £41 including postage. Standard TU ones aren't exactly what you'd call solid, not sure if the xs has a stronger one than others or not. My motorfactor got us one from a diesel ZX that fitted, cost about £15. Stiffer than normal TU one too. Share this post Link to post Share on other sites
Guest smokinslim Posted June 26, 2006 (edited) Made for the TU 1400 challenge TImotorsport The people there are quite helpful, have given me some useful advice in the past, even managed to get me a clutch cable after peugeot sold me the wrong one as mine isn't made anymore. Edited June 26, 2006 by smokinslim Share this post Link to post Share on other sites
Rippthrough 98 Posted June 26, 2006 Made for the TU 1400 challenge TImotorsport The people there are quite helpful, have given me some useful advice in the past, even managed to get me a clutch cable after peugeot sold me the wrong one as mine isn't made anymore. 306 one fits 205's. Share this post Link to post Share on other sites
Jer309GTi 3 Posted June 26, 2006 Made for the TU 1400 challenge TImotorsport The people there are quite helpful, have given me some useful advice in the past, even managed to get me a clutch cable after peugeot sold me the wrong one as mine isn't made anymore. Cheers for the link, will give them a call tomorrow 306 one fits 205's. Is that 306 TU engine mount fits a 205? Or all 306 mounts? Share this post Link to post Share on other sites
Rippthrough 98 Posted June 26, 2006 Cheers for the link, will give them a call tomorrowIs that 306 TU engine mount fits a 205? Or all 306 mounts? Clutch cable Share this post Link to post Share on other sites
Guest smokinslim Posted June 27, 2006 Ha ha got me too at first, nice one Rippthrough. I'll bear that in mind next time. Share this post Link to post Share on other sites
