adammada33 0 Posted June 14, 2006 A common questions on here seems to be, How do I remove a wing and How do I remove a wing without damaging it. The wing is glued on with hard bostic glue/sealent I have done 6 now and have found a great techneque which leaves them undamaged. You need an electric jig saw (battery or plug in) and a hacksaw blade (as fine tooth pitch as possable to lower cutting force and best quality you can get as they are stronger which helps)and a grinding wheel Grind one end of the blade till it fits in your jig saw then lock it in This can then be used to cut away 95% of the sealant it might break once or twice but just regrind. I tried all the other methods like hot knife but if you have the kit this seems best to me. Hope this helps Adam Share this post Link to post Share on other sites
pugpete1108 62 1 Cars Posted June 14, 2006 A common questions on here seems to be, How do I remove a wing and How do I remove a wing without damaging it. The wing is glued on with hard bostic glue/sealent I have done 6 now and have found a great techneque which leaves them undamaged. You need an electric jig saw (battery or plug in) and a hacksaw blade (as fine tooth pitch as possable to lower cutting force and best quality you can get as they are stronger which helps)and a grinding wheel Grind one end of the blade till it fits in your jig saw then lock it in This can then be used to cut away 95% of the sealant it might break once or twice but just regrind. I tried all the other methods like hot knife but if you have the kit this seems best to me. Hope this helps Adam i little too late for me , i have just decimated two wings cos i got the hump with the sealant and just ripped them off o well on needed replacing anyhow, good tip tho should remember that one Share this post Link to post Share on other sites
adammada33 0 Posted June 14, 2006 i little too late for me , i have just decimated two wings cos i got the hump with the sealant and just ripped them off o well on needed replacing anyhow, good tip tho should remember that one The first ones I did ended up a mess even though I spent hours this method was learnt through hours of frustration Share this post Link to post Share on other sites
