westy 0 Posted June 8, 2006 Hey guys, I've just changed the driveshaft on my 1.6 GTi - and some oil came out. Now, I need to put more in. Where is the filler/breather hole? Thanks Share this post Link to post Share on other sites
j_turnell 137 3 Cars Posted June 8, 2006 Take the passenger wheel off and youll see a 19mm bolt on the side of the box, fill it until it just starts to come out of the hole. Share this post Link to post Share on other sites
joelpsmith 1 Posted June 9, 2006 (edited) i think the best place to put it in is through the breather on top of the 'box. have a dig around the pipes and wires, it should be close the brown multiplug. iirc its a 21mm bolt with breather plug on top. take the the whole thing out and stick a funnel in there. Its a lot easier to fill here with it not being on the side unless you have a bottle with a tube attached. Just make sure you also undo the 19mm plug mention above to check the level. Edited June 9, 2006 by joelpsmith Share this post Link to post Share on other sites
johnrobertgordon 0 Posted June 9, 2006 i think the best place to put it in is through the breather on top of the 'box.have a dig around the pipes and wires, it should be close the brown multiplug. iirc its a 21mm bolt with breather plug on top. take the the whole thing out and stick a funnel in there. Its a lot easier to fill here with it not being on the side unless you have a bottle with a tube attached. Just make sure you also undo the 19mm plug mention above to check the level. I fill mine where the reverse cable go's in. Share this post Link to post Share on other sites