Owain1602 0 Posted May 24, 2006 Hi, how do you recon this jetting will run on a standard 1.6 GTi engine with Omex ignition. They are twin 40 DCOEs. Chokes 35mm (machined) A.Vents 4.5 Mains 135 Airs 175 Idle 45f9 Pump 35 B/bleed 50 Emulsion tubes F16 N.valves 175 this is how the carbs i have just fitted are currently jetted, i will get skip brown to jet them eventualy but i would just like to know what some more knowlagble people think if this setup just to get it running,. thanks a lot guys Share this post Link to post Share on other sites
taffycrook 2 Posted May 26, 2006 Should be ok, at least not so far out to cause any damage. But you should get the fuelling checked on the rollers unless you have a WBL. Share this post Link to post Share on other sites
