John_B 11 Posted May 22, 2006 My Mi wont start and I've found a thin green wire loose from the ignition amp connector. It's connected to number 4 on the connector. Anyone know where it's supposed to go? Is it an earth? Share this post Link to post Share on other sites
jonand 0 Posted May 22, 2006 My Mi wont start and I've found a thin green wire loose from the ignition amp connector. It's connected to number 4 on the connector. Anyone know where it's supposed to go? Is it an earth? My Mi wont start either , and the amp connections on mine are: pin1 to coil pin 2 pin 2 to earth (green/yellow - M) pin 3 no connection pin 4 switched +ve (brown - 2B) pin 5 + 6 to ecu pin 1 (green - 101) I've no reason to doubt these as it started previously Hope it helps Jon Share this post Link to post Share on other sites
mbayley77 0 Posted May 22, 2006 My Mi wont start and I've found a thin green wire loose from the ignition amp connector. It's connected to number 4 on the connector. Anyone know where it's supposed to go? Is it an earth? There is a picture on the main website on the carb guide which shows the wires and where they belong. Share this post Link to post Share on other sites
John_B 11 Posted May 22, 2006 Thanks for the tips. taffycrook sorted it in 2 min. It was actually a live connection though I'm not sure which one. jonand my 4th pin is def green. Pug don't make it easy do they. Share this post Link to post Share on other sites
