Guest speeddemon Posted May 19, 2006 hi every1, i am going to be fitting some koni adjustables to my limited edition miami blue 1.9gti, but somebody told me i have to the lower the back seperately?(poss lower rear beams) any advise appreciated cheers graham Share this post Link to post Share on other sites
jonD6B 0 Posted May 19, 2006 You will have to lower the rear to suit the front. This is covered all the time so do a search to see what info. best suits you, i.e. how many splines to drop it and whether it's something you would look at doing yourself etc. Share this post Link to post Share on other sites
Anthony 1,003 Posted May 19, 2006 Lowering the rear beam one spline pretty much matches the lowering springs on the front perfectly Just be warned that you might be opening a whole can of worms when you come to lower the beam if it's not been rebuilt, as an awful lot of beams out there are in a pretty sorry state that only truely becomes apparent when you taken them apart to lower... Share this post Link to post Share on other sites
