P_205GTi 0 Posted May 16, 2006 yes i have searched and can find much on this. i want an aftermarket 4 branch manifold and cant find anywhere that does them. any ideas people? cheers Share this post Link to post Share on other sites
tidypug 5 2 Cars Posted May 16, 2006 magnex do them, i'm not sure of a price but i do know they are quite expensive. Share this post Link to post Share on other sites
DaveW 6 Posted May 16, 2006 ebay is your best bet for a magnex 4 branch. Share this post Link to post Share on other sites
smckeown 1 Posted May 16, 2006 your searching must be crap then, as its been covered many times on this forum autofive sell the iresa shenpar sell 2 others Share this post Link to post Share on other sites
P_205GTi 0 Posted May 16, 2006 sorry what did you search then? Share this post Link to post Share on other sites
hengti 2 Posted May 16, 2006 try using the keyword 'manifold' - 18 pages of it! the magnex manifold is about £200 new - think the iresa one is similarly priced. dunno how much the shenpar ones are. the magnex is the most common one though - they sometimes pop up on here for about £100 s/h easy to fit and they do make a difference (rr tune likely required for full benefit) Share this post Link to post Share on other sites
Richie-Van-GTi 71 2 Cars Posted May 16, 2006 Torino's sell the csc marmitte one as well. Share this post Link to post Share on other sites
Martin@PRD 0 Posted May 17, 2006 Auotfive will be releasing a new S/S 4 branch soon, got it here awaiting testing. Share this post Link to post Share on other sites
hengti 2 Posted May 17, 2006 Auotfive will be releasing a new S/S 4 branch soon, got it here awaiting testing. Martin - just out of interest, what's the flexi coupling used on this manifold? thanks Share this post Link to post Share on other sites
Martin@PRD 0 Posted May 17, 2006 mesh intertwinded type, ball shaped. will post some pictures up as soon as i have heard from Autofive Share this post Link to post Share on other sites
Guest Fangoria Posted May 17, 2006 i thought Magnex stopped selling their 4 branch manifolds? i fitted one recently to my 1.9 road rally car and the difference was easily noticeable Share this post Link to post Share on other sites
hengti 2 Posted May 17, 2006 i looked into replacing mine about 6 months ago - they were still available then - dunno if thats changed since though they do work quite well, but they're expensive and not particularly well made (imo) - the knuckle joint is a known problem (i've tried three different ones on mine to try and cure the blowing noise. got a ss mesh flexi joint on it at the moment - best i've found so far). and the blanking piece inbetween the four pipes worked loose (about 6 months ago!) and fell off into the collector pipe. thankfully managed to get a mate to cut it open and tig weld it all up again. saved me £200! Share this post Link to post Share on other sites
