Owain1602 0 Posted May 14, 2006 I have all my loom out of the 205 and im goinna make my own wiring loom for the lights, its gonna be my rally car so all i want is for it to pass an MOT. Im converting to carbs and omex ignition so i have made looms for them anyway. I have done some wiring diagrams for the lights, they are only showing the front lights currently except for the brake circuit. Im gonna mount the relays and fuses on an alloy plate on the dash. Im going to use a toggle switch for the side lights and dip beam but keep the stalk for main beam and indicators if possible. The hazard switch will also be a toggle switch. Do you guys mind having a look at my diagrams to see if there's anything wrong, also, will normal relays be able to handle these sort of currents, for example the indicator relay will feed the front,side and rear indicators, will this take much current? Thanks a lot guys. http://i43.photobucket.com/albums/e396/owa.../indicators.jpg http://i43.photobucket.com/albums/e396/owa...2/sidelight.jpg http://i43.photobucket.com/albums/e396/owain1602/dipbeam.jpg http://i43.photobucket.com/albums/e396/owa.../brakelight.jpg Share this post Link to post Share on other sites
