Kitsune 0 Posted May 13, 2006 Just looking at my original pedal box today and notice the clutch cable and pedal have a pin type lock at the pedal end. This was originally fitted to a BE1 box. I've got another pedal box and cable but this time the cable merely hooks over the pedal, and this was from a BE3 box (slightly different cable at box end too). I plan to use a BE3 box, so which cable/pedal box should I use? How many types are there? Pics to follow. Share this post Link to post Share on other sites
Kitsune 0 Posted May 13, 2006 Pic one: BE1 clutch cable. As you can see, the cable is locked in via a pin running through the pedal. The cable then has a bit like on a brake cable stopping it from slipping out of the bracket attached to the pedal. Pic two: BE3 cable? Uses a plastic bracket which merely hooks over the end of the pedal. Share this post Link to post Share on other sites
huxley309 0 Posted May 13, 2006 (edited) The one at the bottom mate...the be1/be3 cables are different at both ends and iirc the be3 has a longer cable Be3 is the bottom pic Oh and pm sent mate...i'll sort you out with those pics tm Edited May 13, 2006 by huxley309 Share this post Link to post Share on other sites
Kitsune 0 Posted May 13, 2006 Nice one. Cheers hux. Will just change the servo and MC over as I'm running a 22mm MC. One was longer than the other, but cant remember which. Is there any difference in the clutch mechanism? Never had a look at a BE3. Share this post Link to post Share on other sites
huxley309 0 Posted May 13, 2006 Well...the arm looked similar but i doubt its the same,the realease bearing however is different but you can use the same plate and cover so they're both very similar Share this post Link to post Share on other sites
