TVH 0 Posted May 12, 2006 Finally my GAZ competition kit arrived...but...the coil springs are 2.5" I.D. and I can't find helper springs and spring plates anywhere! Only 2" ID are available! The kit came with 325lbs 7" springs that should be fine for track use with 23mm rear TB's and 24mm rear arb. But I still need it to pass MOT... Share this post Link to post Share on other sites
Guest smokinslim Posted May 13, 2006 I know someone who had a load of eibach helper springs up for sale recently. If you jot down what you want exactly i'll see if he has anything suitable for you. Share this post Link to post Share on other sites
TVH 0 Posted May 15, 2006 (edited) I know someone who had a load of eibach helper springs up for sale recently. If you jot down what you want exactly i'll see if he has anything suitable for you. Thanks for the reply, what I need is a pair of 2,5" or 65mm (afaik, these should be the same) helper srpings, free lenght about 4" and the spring rate is not important. And also a pair of 2,5" adapter plates that go between the main spring and the helper. Also, PayPal payment would be by far the easiest option if possible. Edited May 15, 2006 by TVH Share this post Link to post Share on other sites
