Bassman 1 Posted May 10, 2006 Got the car up on ramps and have found my PAS leak. The fluid is coming out the top of the ram, I haven't removed it yet (had to buy a 55 TX bit), but will take it off tomorrow. Can these rams be taken apart and re-sealed? I was looking at one on eBay for a 306 which is identical, but it is at 41 quid now, anybody know what they go for at a scrappy? Ta Share this post Link to post Share on other sites
Miles 331 1 Cars Posted May 10, 2006 Never taken one apart as I just replace them if needed, They come off without too much hassle but make sure you don;t break the metal pipes, I;ve got loads of good rams if needed Share this post Link to post Share on other sites
saveloy 8 Posted May 10, 2006 Many a time the bushes secuting the rams in fail and cause movement and leakage. If it isn't too far gone it may simply need new bushes. Share this post Link to post Share on other sites
Bassman 1 Posted May 11, 2006 Cheers guys, I'll get it off and have a look. Miles I'll PM you about a ram if need one thanks. Share this post Link to post Share on other sites
huxley309 0 Posted May 11, 2006 As saveloy said could be worn bushes but they're nothing to replace If it is the pipes and the bushes get them from pug,last time my pipes went the set they supply were greatly improved Share this post Link to post Share on other sites
