mikeyde 1 Posted May 8, 2006 After fitting the 309 subframe the tracking on my 205 has shot way out. Just wondering if its still ok/safe to drive the car to get it fixed? It's about 3 miles. Cheers Mikey Share this post Link to post Share on other sites
keith 0 Posted May 8, 2006 maybe because your using my alloys lol Share this post Link to post Share on other sites
Ahl 4 Posted May 8, 2006 Depends how much the tracking it out eh? For going somewhere to get it done properly, you can actually get the tracking pretty much parallel with (or parallel enough) with a tape measure on the brake discs. Share this post Link to post Share on other sites
mikeyde 1 Posted May 8, 2006 maybe because your using my alloys lol They're gathering dust in my garage ill give you a text as my msn is broken at the mo! So if i mess about with the track rods i should be able to get it reasonably straight (enough so to drive) and get the pros to sort the rest? Will i need to tell them that ive used 309 gear or does it not really matter to them? Mikey Share this post Link to post Share on other sites
Guest smokinslim Posted May 8, 2006 Will i need to tell them that ive used 309 gear or does it not really matter to them? I wouldn't if you go to your local dealership, it'll confuse them Share this post Link to post Share on other sites
Miles 331 1 Cars Posted May 8, 2006 Ahl is right, you should get the tracking near enough to drive with a measure of some sort, No need to tell anyone what parts are used just set the tracking to parellel Share this post Link to post Share on other sites
XLR8 0 Posted May 10, 2006 my rear tracking was way out- turned out to be a bent axle stud! Share this post Link to post Share on other sites
