Adnic69 0 Posted May 8, 2006 I have stripped it down and it's ready for rebuilding. Is anyone local to MK that would do it? Or how long would it take me to do it? Share this post Link to post Share on other sites
pug_ham 244 3 Cars Posted May 8, 2006 If you've already stripped it down you have done about the hardest part of the job imo. Getting the outer bearings out is probably the only bit thats worse. A beam can be done start to finish in a slow day with multiple tea breaks so you only have a couple of hours work left to complete it. Graham. Share this post Link to post Share on other sites
jonnie205 1 Posted May 8, 2006 i can do it for you if you like, ime only in bicester Share this post Link to post Share on other sites
XLR8 0 Posted May 10, 2006 i can do it for you if you like, ime only in bicester I thought my beam was shot, but it turns out the axle stud was bent!- easy to replace & only costs £35 Share this post Link to post Share on other sites
Adnic69 0 Posted May 11, 2006 Sorry for the delay in replying. If I am only a few hours away from finishing it I will give it ago. However if you could give me some idea of cost for you doing it Jonnie I could see when I could drop it off. Share this post Link to post Share on other sites
