Baz 421 Posted April 20, 2006 I stripped a ZX16v some time ago for its heart, i also kept the driveshafts, whole struts/legs and brakes etc. Are these any different to the S16 parts? Does anyone know what can be put on a 205? I beleive the brakes can be used as they are bigger, would i have to use the carriers and hubs too? I have a pair of 309 wishbones and am after some driveshafts to go with them, and wondered about the ZX ones, although could be too long? Any help/advice would be much appreciated Barry. Share this post Link to post Share on other sites
Ahl 4 Posted April 20, 2006 This might well be wrong, but I think the zx16v has the same components as the s16. Then the hubs are effectively 1.9 items and you'll be able to use the brakes on any 1.9 (or base model) hubs. You'll need the carriers of course. Share this post Link to post Share on other sites
Kev-G 1 Posted April 21, 2006 Hubs + brakes will fit 1.9 shafts. Drive shafts are longer than 309 ones and will be no good with 309 wishbones. Share this post Link to post Share on other sites
Baz 421 Posted April 22, 2006 Cheers guys, very helpful!! Thought i would've heard about the ZX shafts already if they were suitable! Nevermind! Share this post Link to post Share on other sites
inferno 1 Posted May 4, 2006 is this 16v not the lairy 167bhp model with the dual tract inlet?drive shafts are the same as a 306dt apart from the dt ones being thicker if thats any help Share this post Link to post Share on other sites
Baz 421 Posted May 5, 2006 is this 16v not the lairy 167bhp model with the dual tract inlet?drive shafts are the same as a 306dt apart from the dt ones being thicker if thats any help Dual inlet tract would be right, but it's around 155bhp not the later 167 (GTi6 spec) engine that doesn't have the dual inlet tract. I want to use the driveshafts on a 205 with 309 arms, so not much help to me but thanks anyhoo! Heard that BX gti driveshafts may be of equal length so have to try that one as might widen the search for some!! Share this post Link to post Share on other sites
inferno 1 Posted May 5, 2006 i have a good pair ov bx 16v shafts... Share this post Link to post Share on other sites
