pacey205 2 Posted April 17, 2006 One for you CTI boys. Is it the same as the mech in a 3 door shell ? The one Ive seen only has one slider and Im sure the non-CTI one has two sliders. Is it possible to modify a non-CTI one (i.e. remove a slider arm) or is it a case of finding a CTI one. If so any ideas of where to get one (GSF dont seem to list one). By the way they are manual windows. Cheers Michael Share this post Link to post Share on other sites
steve@cornwall 100 Posted April 17, 2006 One for you CTI boys. Is it the same as the mech in a 3 door shell ? The one Ive seen only has one slider and Im sure the non-CTI one has two sliders. Is it possible to modify a non-CTI one (i.e. remove a slider arm) or is it a case of finding a CTI one. If so any ideas of where to get one (GSF dont seem to list one). By the way they are manual windows. Cheers Michael hi! 3 door mech will fit into cti, just cable-tie the extra arm to the other one! one word of warning though, check the height that the window winds up! I shut mine with the window up after the change and ended up with a pile of "diamonds" new drivers window £116!!!! I am waiting for a Guernsey reg cti to arrive for breaking so may have a mech soon....... Share this post Link to post Share on other sites
Henry Yorke 269 3 Cars Posted April 18, 2006 Just drill out the centre of a GTI one. I have two manual ones from a 1993 CTI if you are interested? Share this post Link to post Share on other sites
