Another 2.0 8v Turbo Question

[trevor_stiles 0]

I am halfway through converting my citroen xantia wiring loom to the 205 gti wiring loom.

 

I have a peugeot 605 wiring loom already converted so im using this as a guide to connect the right wires, etc on the xantia loom to the 205 loom.

Problem is on the converted loom one of the wires on the 605 goes to a relay which is intergrated into the wiring loom.

The citroen xantia doesnt have the same relays or anything that look the same. I have added a picture of the 605 relay in the link below. Its the red wire that come out of the middle of which leads to the number 2 connector of the big brown 205 multiplug.

Any idea what it should go to on the xantia wiring loom?

 

http://s25.photobucket.com/albums/c60/gav205r5gtt/

[Rob Turbo 3]

I think that relay is just for air con or something, I've had 3 8v turbo looms and none of them have had that relay, just the plug for it

[trevor_stiles 0]

Ok, il leave the wire disconnected and see if it all works. Il let you know

[Guest Martin Jensen]

Rob> Do you have a guide to help connect the too loom´s?

[jacobs53 0]

I did the wiring loom that trevor has now. I did have a diagram around somewhere but have lost it, il try and do another

 

lee

[Guest Martin Jensen]

That would be super, Jacob.

[trevor_stiles 0]

yep that the one lee, do you have any idea on wether i need something connected into the xantia loom????

[Ant 2]

Trev,

 

Just tried to ring you ( 01625 no ) ..

 

Ill try again tomorrow. If its okay, ill pop over and maybe we can sus out whats what with the looms etc

 

Cheers

 

Ant

[trevor_stiles 0]

Hi ant, if you want any help with the loom then it will need to be sharpish as its going to be getting used this week

Cheers