dead205 0 Posted April 9, 2006 I need to get the rear quarter on my white cti repaired - I read somewhere that white is really hard to match. Is this right and if it is would it be worth getting the whole car done? cheers mark Share this post Link to post Share on other sites
SamGTi 0 Posted April 9, 2006 I always thought that white was the easiest colour to match? Share this post Link to post Share on other sites
Guest chris1993GTI Posted April 9, 2006 I always thought that white was the easiest colour to match? White is a pain due to the number of shades. Best way would be to paint half way into the next panel and fade the colour out. Share this post Link to post Share on other sites
Paintguy 0 Posted April 10, 2006 I'd agree with Chris - white can be a very hard colour to match up! A lot of it is in the mixing, a litre of white, with a few drops of yellow, black, blue, red, or whatever. Put in a drop too much, or even a slightly too big drop, and it's all over! Blending out into adjacent panels is by far the best way to ensure a 100% match. Share this post Link to post Share on other sites
tom_m 0 Posted April 10, 2006 if its a decent body shop they shouldn't have that much trouble, the place that did my bonnet got it spot on! Share this post Link to post Share on other sites
Paintguy 0 Posted April 10, 2006 if its a decent body shop... What you trying to say? Share this post Link to post Share on other sites
tom_m 0 Posted April 10, 2006 if its a decent body shop (like paintguy ) they shouldn't have that much trouble, the place that did my bonnet got it spot on! Share this post Link to post Share on other sites
dead205 0 Posted April 10, 2006 (edited) Time for another then Paintguy?! Gonna try to get a quote tomorrow from someone local but I have never seen their handi-work just a word of mouth recommendation. Edited April 10, 2006 by dead205 Share this post Link to post Share on other sites
Guest smokinslim Posted April 11, 2006 My CJs had a damaged quater panel since bout a week before i got it. No amount of searching has shed anylight on the paint code. Peugeot dont know what colour they painted it. Local dealership top guy bought his mrs a cj, was sat in one of their bays when i was tryna find out but they had no idea. They got onto their techsupport people who said the car was too old for their records. Peugeot have used something like 57 different shades of white paint over the years. Share this post Link to post Share on other sites
dead205 0 Posted April 11, 2006 Peugeot have used something like 57 different shades of white paint over the years. Share this post Link to post Share on other sites
Guest smokinslim Posted April 11, 2006 It's a proper PITA tho aint it. To make things worse still my doors have faded a different shade to the rest of the car. I did notice when changing my beam once, on the floor of the boot somewhere near the centre, there was a little metal plate with a number stamped on it. Didn't think at the time but it may be the paint code, it's not in any of the usual 205 places for some reason. Also there's a place near me that will mix any colour paint you want. Enquired there after speaking to peugeot, the guy walked outside, looked at my car from about twenty yards and told me what colour it was. Can't remember what he said but i gotta get some paint in a week or so so i'll find out n let u know. Share this post Link to post Share on other sites
Guest chris1993GTI Posted April 11, 2006 Mines a 1993. The colour is Blanc Meige. The code is POWR. There is a couple of shades. Mines the blue shade? Share this post Link to post Share on other sites
Paintguy 0 Posted April 11, 2006 I did notice when changing my beam once, on the floor of the boot somewhere near the centre, there was a little metal plate with a number stamped on it. I know some 306's had a plate in the boot with the colour code on, as well as the usual 'wax crayon' under the bonnet. If all else fails, ring around some paint/bodyshop suppliers. The one I use has a sort of camera device, which 'reads' the colour and gives out a code that is over a 98% colour match. If that fails, I just match it by eye Share this post Link to post Share on other sites