Jer309GTi 3 Posted April 4, 2006 I took this clutch off of my old 309 engine, and it looks to me like the fingers of the cover are knackered. Are they supposed to have this ridge in them, or is it worn? Cheers Share this post Link to post Share on other sites
PsychoSimon 0 Posted April 4, 2006 Thats wear mate. I'd renew it. Share this post Link to post Share on other sites
Jonmurgie 2 Posted April 4, 2006 For the sake of a few quid I'd replace that... I take it your doing a clutch or have you just pull the 'box off your engine? Share this post Link to post Share on other sites
Rob_the_Sparky 9 Posted April 5, 2006 Yep, that is wear and quite a lot of it... Share this post Link to post Share on other sites
ALEX 98 1 Cars Posted April 5, 2006 Was the release bearing O.K. It could be the cause. They come with new clutches anyway (from GSF) Share this post Link to post Share on other sites
Jer309GTi 3 Posted April 5, 2006 It's off my old 309 engine. I split the box and engine to check the clutch. I've got a new one somewhere, not sure where I put it! Thanks for the replies btw Share this post Link to post Share on other sites
pug_ham 244 3 Cars Posted April 5, 2006 Definately worn beyond use. You get them in a new clutch kit so replacement is no hassle. Looks better than the one on my TD though when I did the clutch last year. Graham. Share this post Link to post Share on other sites
