205Rog 0 2 Cars Posted March 29, 2006 Hi Ya, Simple one hopefully... Where does the servo vacuum pipe go? any pics? or just a description would be great. cheers Rog Share this post Link to post Share on other sites
Ryan 99 Posted March 29, 2006 Doesn't the S16 have a vaccum pump on the end of the cam? If so then it goes to that. Share this post Link to post Share on other sites
Rippthrough 98 Posted March 29, 2006 To the brake servo! I'll get my coat. Share this post Link to post Share on other sites
205Rog 0 2 Cars Posted March 30, 2006 sorry it still attached to the servo so the end that goes onto the engine, I think it could be on the cams however on my engine its been capped off with an allen key bolt. Share this post Link to post Share on other sites
Hilgie 16 2 Cars Posted March 30, 2006 The S16 has a vacuumpump that is connected to the inletcam. That's where the server needs to be connected to. You can't connect it to the inletmanifold as the pressure there is quite sensitive to changes due to the variable lenght inletmanifold. Share this post Link to post Share on other sites
