Kenballs 0 Posted March 17, 2006 I'm trying to remove the distributor rotor on an mi and I thought it should just pull off but it doesn't want to move and I don't want end up breaking anything, if anyone knows the answer it'd be much appreciated.. Cheers, Ken. Share this post Link to post Share on other sites
sonofsam 5 Posted March 17, 2006 (edited) Yeh i had similar problem before,i got mine of with two flat screwdrivers,levering equally and gently on both sides of the spindle,it popped off eventually Edited March 17, 2006 by sonofsam Share this post Link to post Share on other sites
Kenballs 0 Posted March 17, 2006 Yeh i had similar problem before,i got mine of with two flat screwdrivers,levering equally and gently on both sides of the spindle,it popped off eventually Thanks a million, I thought that alright but I hate putting pressure on stuff when I'm not 100% sure it's not going to be destroyed as a result! Much obliged, Ken. Share this post Link to post Share on other sites
Ryan 99 Posted March 17, 2006 On the mi16 the rotor arm is screwed on. There are 3 small allen bolts holding the rotor to the metal mount. And a large bolt holding the mount to the end of the cam. Share this post Link to post Share on other sites
Kenballs 0 Posted March 17, 2006 On the mi16 the rotor arm is screwed on. There are 3 small allen bolts holding the rotor to the metal mount. And a large bolt holding the mount to the end of the cam. I figured that out in the end alright. Fair play. Share this post Link to post Share on other sites
