Eryl1.9Gti 0 Posted March 14, 2006 How do you take off the plastic bit of the mirror, the one on the inside with the sleve that goes round the adjuster arm thingy, without snaping it off. Had to replace my door as some f***s decided that they were more deserved of MY stereo (bent the door in getting in), and as i was trying to gently persuade it off with a screwdriver i herd a snap and the the thing came off . Do you just have to glue it back on or is there a trick to getting it off Share this post Link to post Share on other sites
GLPoomobile 958 Posted March 15, 2006 Yeah, I was wondering the same as I've done this on both mirrors on my previous 2 205s. Don't want to do it on my current one, but I'm starting to think it's physically impossible! Share this post Link to post Share on other sites
ALEX 98 1 Cars Posted March 15, 2006 (edited) It's just about impossible not to snap them. I bought a new one a while back and they're only a fiver from Peugeot. You have to swap the rubber bit over from your old one. I also imagine the cost might have gone up since then too. Edited March 15, 2006 by ALEX Share this post Link to post Share on other sites
timmsy19 3 Posted March 15, 2006 Yeah, I was wondering the same as I've done this on both mirrors on my previous 2 205s. Don't want to do it on my current one, but I'm starting to think it's physically impossible! ditto. ive just taken mine off and thought they were imoppsible not to snap them now i need some new plastics Share this post Link to post Share on other sites
RobMGti 0 Posted March 15, 2006 Thats odd i thought they were easy to get off? Replaced them on both my old 205's Rob Share this post Link to post Share on other sites
Guest smokinslim Posted March 16, 2006 mine got stuck back on with silicone; at least if they need to come off again they won't get damaged further Share this post Link to post Share on other sites
Ritmo 0 1 Cars Posted March 16, 2006 Same happened to me Eyrl had to replace the door after some bam put a screwdriver through the door to take the cd player. I used blu-tack to hold them back on. Share this post Link to post Share on other sites
Eryl1.9Gti 0 Posted March 29, 2006 Blu-tack. You Genius!!!!! Didnt think of that. All i need now is the know how to re wire a stereo back into it as the plastic block came off with the stereo, and also the aerial. So i have a load of wires and no idea where they go. Share this post Link to post Share on other sites
Daxed 7 Posted March 29, 2006 Thats odd i thought they were easy to get off? Replaced them on both my old 205's Rob So come on Rob, spill the beans. How do you get the damn things off? Share this post Link to post Share on other sites
markic 0 Posted April 13, 2006 Thats odd i thought they were easy to get off? Replaced them on both my old 205's Rob Same here, Had mine off on the n/s several times due to some t**t keep snapping my door mirror off! never broke them. Share this post Link to post Share on other sites
pugman 0 Posted April 14, 2006 i've had the same problem. The plastic pins push into metal clips which holds the trim in place. Its because it is such a tight fit in these clips that they are hard to get off. You can get plastic bushes to replace the metal clips from a Peugeot dealership. Share this post Link to post Share on other sites
