pugrallye 0 Posted March 1, 2006 Hi all how the hell do you remove the carrier plate/ mounting bracket for the original engine ECU on a ph 2 GTI?? cant for the life of me see whatever is holding it up! Share this post Link to post Share on other sites
TEKNOPUG 3 Posted March 1, 2006 To the actual car itself, under the dash? Double-sided foam! Just pull/twist/lever it off........or am I thinking of my immobiliser...... Share this post Link to post Share on other sites
dee205 3 Posted March 1, 2006 It's a real c*nt to remove. Do you need to remove it? You could always make your own up. Damien Share this post Link to post Share on other sites
pugrallye 0 Posted March 1, 2006 no needs to come out, its stuck right up top of dash somewhere, is it a clip or a bolt? Share this post Link to post Share on other sites
Miles 331 1 Cars Posted March 2, 2006 You need to undo the Dash, Remove the panel where ther wipers are and you'll see a Nut by the wiper arm, Undo this and that will allow the dash to move once you;ve got the inside part done first Share this post Link to post Share on other sites
