Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
Guest naughtymutt

Headlight Earth Point

Recommended Posts

Guest naughtymutt

Does anyone know where to get a headlight earth point as they have perished on my pug.

 

Or does anyone know the pug part number for them.

Share this post


Link to post
Share on other sites
Guest smokinslim

Find somewhere on the chassis to earth it to simple :(

Share this post


Link to post
Share on other sites
pug_ham

There is a block on either side of the front panel just inside of the headlamps, a good mod is to remove this & crimp ring terminals onto the wire ends & fit them directly to the body using the bolt from the earth point.

 

Graham.

Share this post


Link to post
Share on other sites
Paintguy

That mod is definately high on my list of things to do Graham.

 

It's currently pot luck which combination of headlights/spots/fogs or flashers work at any given time! Jiggleing the earth block about normally sorts out whichever light isn't on, but causes a different one to stop working! :(:D

Share this post


Link to post
Share on other sites
Simes
That mod is definately high on my list of things to do Graham.

 

It's currently pot luck which combination of headlights/spots/fogs or flashers work at any given time! Jiggleing the earth block about normally sorts out whichever light isn't on, but causes a different one to stop working! :(:D

 

I did it a few years ago, on both sides, also sorts out the horn, screen washer pump etc.

Share this post


Link to post
Share on other sites
Ahl

Nice mod, i'll be doing this soon too.

Share this post


Link to post
Share on other sites
Guest naughtymutt

If anyone is interested, I was quoted £5 for each earth point at my local Pug dealer today. but you have to buy 4.

Share this post


Link to post
Share on other sites
pug_ham
If anyone is interested, I was quoted £5 for each earth point at my local Pug dealer today. but you have to buy 4.
Hmm, electric ring terminals, less than £1 for five.

 

Sounds much better to me.

 

Graham.

Share this post


Link to post
Share on other sites
Simes
Hmm, electric ring terminals, less than £1 for five.

 

Sounds much better to me.

 

Graham.

 

Yep, plus a decent crimp tool which will become very useful.

Share this post


Link to post
Share on other sites
Ahl

I tried getting a good connection on the earth point and plugs a while back. It helped a little.

 

but yesterday I crimped the wires on one side to a ring terminal and bolted it on, and I can see that that side is brighter than the other. :)

Share this post


Link to post
Share on other sites
Guest naughtymutt

am I correct in thinking I just cut off the pug connection, crimp on the rings terminals and bolt it to the chassis... yes?

Share this post


Link to post
Share on other sites
Simes
am I correct in thinking I just cut off the pug connection, crimp on the rings terminals and bolt it to the chassis... yes?

 

Yep, remove the OE yellow earthing point.

Cut of the terminations from the wires

Re-terminate with the ring terminals.

Using the original bolt that held the earthing point on put the rings over this and tighten up.

Edited by Simes

Share this post


Link to post
Share on other sites
Sign in to follow this  

×