PhilCTI 1 Posted February 21, 2006 Hopefully I will get the car on the road in the next couple of weeks, can someone suggest a rolling road in the Hampshire area where I can get it tuned properly? I bought the car as a sorn, so I don't know how well it's set up, I've also fitting an induction kit, mainly because the original air box was falling off and I got fed up with all the pipes in the way. I did tweak the brass screw on the inlet slightly to get the engine to keep running on idle, and it does run sweetly now, well for a 205! but it needs to be done properly, as someone's bound to say it will blow up now because I've touched it! many thanks, Phil Share this post Link to post Share on other sites
Miles 331 1 Cars Posted February 22, 2006 You don;t need a rolling road to set it up really, Any good tuner can do this by using a CO analizer in the exhaust pipe and setting the injection up as it should, I;ve always done this and never had a problem, Show you how good it ismy CTi gave 137bhp on a RR day for figures only Share this post Link to post Share on other sites
PhilCTI 1 Posted February 23, 2006 Thanks Miles for the reply, I was just going on what others had said on here especially after installing an induction kit, but if it can be done by any decent tuner thats fine. Maybe its a bit chav boy racer but I've never been near a rolling road in my life and sounded like a bit of fun after months of hard work being cold, stuck in the garage, rebuilding her! Phil. Share this post Link to post Share on other sites
