Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
A18_RYU

205 Base Model Alloys

Recommended Posts

A18_RYU

hey all, i am picking up some nimrods off a friend soon, and they are off the 206 GTi.

 

am i right in saying that the 206 gti ones have an offset of 25?

 

if so, looking on the team dynamics website, 16" wheels on a 205 should be offset 18?

 

really quite confused about what i need to get in order to fit these wheels to my XS.

 

can someone point me in the right direction?

 

thanks

Share this post


Link to post
Share on other sites
pug_ham

No, 206 ones need a spacer to give the correct offset. The 206 offest is 25 like you found & the 205 is 18-19 depending on where you believe.

 

Its the ones from a 406 that are a straight fit to a 205.

 

Graham.

Share this post


Link to post
Share on other sites
A18_RYU

so what spacers do i need?

Share this post


Link to post
Share on other sites
Sam

I always thought the 206 was 28mm, if so you'll need 10mm hubcentric ones, which can be bought from ebay.

 

You're going to have "fun" fitting those wheels to the rear of a base model. Its possible with 195/40/16 tyres, made by Continental, Dunlop, (another brand I can't remember) and now Toyo I hear.

 

I've just ordered my wider rallye arches for mine, I'll post how I get on modifying the rear arches to suit my 8" 16s, you should have an easier time of things with the 7"(?) 206 wheels.

Share this post


Link to post
Share on other sites
A18_RYU
I always thought the 206 was 28mm, if so you'll need 10mm hubcentric ones, which can be bought from ebay.

 

You're going to have "fun" fitting those wheels to the rear of a base model. Its possible with 195/40/16 tyres, made by Continental, Dunlop, (another brand I can't remember) and now Toyo I hear.

 

I've just ordered my wider rallye arches for mine, I'll post how I get on modifying the rear arches to suit my 8" 16s, you should have an easier time of things with the 7"(?) 206 wheels.

 

fun fitting them to the rear? is this due to the diameter?

 

do i need some longer wheel bolts aswell??

 

cheers

Share this post


Link to post
Share on other sites
Sam

Its because the rear arches of a base model don't offer much clearance for wheels.

 

Maximum you can run really is a 15"x6.5 (perhaps 7) with 195/45, if you were to go for 16 then really I think only 195/40 tyres would fit and clear the arch, even then you have to remove some of the "excess" metal.

 

If you use spacers yes you'd need bolts, but you normally get them with the proper kits.

Share this post


Link to post
Share on other sites
Guest smokinslim

That would be the cheapo option (not hubcentric), this is what you want preferably: Clicky! :rolleyes:

 

15"x7 with 195/50s will fit if the rear beam is normal height, you'd have problems with any serious ass on the back seat tho lol.

Lowered 60-70mm on the back the arch is sat on the tyre.

 

I changed my beam today, means i can finally use the new 7" rims i've 3 months now :wacko: I'll post a pic or two when they're on.

Share this post


Link to post
Share on other sites
A18_RYU

the link you given me are hubcentric ones......??

they are the way to go no?

Share this post


Link to post
Share on other sites
Guest smokinslim
the link you given me are hubcentric ones......??

It's the auction title give it away isn't it... 'HUBCENTRIC WHEEL SPACER KIT'

There was a topic a few weeks back (a search should find it) about spacers and was quite well discussed.

Basically the hubcentric spacers offer much more strength and support than the cheaper spacers.

Share this post


Link to post
Share on other sites
sonofsam
That would be the cheapo option (not hubcentric), this is what you want preferably: Clicky! :(

 

15"x7 with 195/50s will fit if the rear beam is normal height, you'd have problems with any serious ass on the back seat tho lol.

Lowered 60-70mm on the back the arch is sat on the tyre.

 

I changed my beam today, means i can finally use the new 7" rims i've 3 months now :D I'll post a pic or two when they're on.

 

Be carefull wich ones you buy,those up for auction are Ford to Pug spacers.

May have been said before though.

Edited by sonofsam

Share this post


Link to post
Share on other sites
Guest smokinslim
Be carefull wich ones you buy,those up for auction are Ford to Pug spacers.

My bad :) didn't notice that. Was the first thing google kicked out when i searched for hubcentric spacers.

Share this post


Link to post
Share on other sites
A18_RYU

ok cheers.

so i am gonna look for some 10mm spacers hubcentric and some longer wheel bolts!

Share this post


Link to post
Share on other sites
sonofsam
ok cheers.

so i am gonna look for some 10mm spacers hubcentric and some longer wheel bolts!

 

I have a set of longer bolts,But do you need flat seated bolts? as apposed to tapered for aftermaket alloys

Share this post


Link to post
Share on other sites
Sign in to follow this  

×