Gavin Waddell 18 Posted February 12, 2006 in the final stages of putting thr mi in and have come to a kittle hurdle which is the throttle cable. mow the 1,6 one is to short and i dont have the Mi. Îve looked around on the forum for engine bay photos and got a few ideas. was thinking using the original mount and using a brake cable for a mtb for the extra length. would this seeem about right, if not what are other people running on theirs. gavin Share this post Link to post Share on other sites
Paintguy 0 Posted February 12, 2006 I'm sure sombody more knowledgable will come along soon, but the advice I was given was to get a universal 405 one from a Pug dealer. Apparently they are over-length, and can be trimmed to size. Share this post Link to post Share on other sites
jackherer 543 Posted February 12, 2006 as paintguy says, or citroen dealers sell the same thing, just ask for a bx 16v or 405 mi16 throttle cable and you cant go wrong (unless you ask for a bx part at the pug dealers or vice versa, something I do all the time ) Share this post Link to post Share on other sites
dee205 3 Posted February 12, 2006 The cable I bought from a local motor factors was for a 405 to name but a few other vehicles. Universal and was about 3 foot longer than I needed. Just a matter of cutting it to the required size. Damien Share this post Link to post Share on other sites
