notamondayfan 44 Posted February 7, 2006 hey guys, been working on the dimma, took the sills and rear quarter panels of the kit to asses the rust damage. it was bad, to say the least! anyway, were in the process of replacing the metal sills, and parts of the rear quarter panel, but we dont know what is used to stick in back onto the metal. it looks like it was stuck on with body filler, but i imagine this wouldnt flex enough. a friend of mine sugested "silkaflex". what do u guys sugest? Share this post Link to post Share on other sites
tom_m 0 Posted February 7, 2006 paintguy will know, he da guru Share this post Link to post Share on other sites
j_turnell 137 3 Cars Posted February 7, 2006 Im guessing some good panel adhesive like tiger seal, or something along those lines.. Share this post Link to post Share on other sites
pugrallye 0 Posted February 7, 2006 sikkaflex is one of the best things around, can be hard to get hold of though Share this post Link to post Share on other sites
Paintguy 0 Posted February 7, 2006 As mentioned, Sikaflex or Tigerseal are brand names to look out for, and both are favourites of mine, but any PU (polyurethane) adhesive sealant should be up for the job. For an online supplier of Tigerseal, look here Share this post Link to post Share on other sites
notamondayfan 44 Posted February 8, 2006 cheers guys, jus what i needed. cant wait 2 get it all back together! Share this post Link to post Share on other sites
Ant 2 Posted February 9, 2006 Tiger seal is great... . Until you need to remove something thats glued with it LOL Share this post Link to post Share on other sites
notamondayfan 44 Posted February 9, 2006 well i hope ill neva have 2 remove it eva again! getting the parts off this time was a big enough hassle, especially the rear quarter panel cover! Share this post Link to post Share on other sites
