Trigger Wheel Mounting And Type?

[pugpete1108 62 1 Cars]

hi all , currently converting my 8v 1.9 to bike tb's and emerald management , just a bit confused what trigger wheel do i need is it 36-1 ?? and where is the best place to mount mount it? also how do i time it right does it fire at tdc on cylinder 1 ? and where can i get a sensor that will run on emerald and the correct trigger wheel

cheers guys

[Jonmurgie 2]

I believe that as Pugs use Bosch ECU's you will require a 60-2 trigger... as for the rest I can't help you I'm affraid.

 

As a side, I notice your fitting bike carbs... have you been reading the recent threads regarding Bike Carbs and the issues with getting a decent inlet manifold? Have you sorted an inlet manifold yet, and if so what have you done?

[Hilgie 16 2 Cars]

Emerald can handle Bosch 60-2 signals, so I suggest you get a flywheel with a TDC ring (get one from a Mi16, you'll have a bigger clutch as bonus)

[feb 47]

afaik the emerald can support 60-2, 36-1 and a lot more trigger wheels, but best to speak to emerald , they are very helpful.

[DrSeuss 0]

Most ecu's worth their salt should cope with most layouts. For a bolt on trigger wheel solution speak to Mattsav, he should sort you out with whats required.

[feb 47]

Miles can also supply you with a trigger wheel kit.

[pugpete1108 62 1 Cars]

As a side, I notice your fitting bike carbs... have you been reading the recent threads regarding Bike Carbs and the issues with getting a decent inlet manifold? Have you sorted an inlet manifold yet, and if so what have you done?

 

 

i haven't as yet but im looking at fitting a shortened mi manifold and keeping the injectors etc for that , but havent really got that far yet , don't really know if they fit?/ any ideas other than that?

[DrSeuss 0]

for one thing, the mi manifold won't fit the 8v head. For two you want gsxr bodies from 2001-2003 as they're individual, later bodies became joined.

 

You'll probably want to speak to bogg brothers about a manifold, but don't expect much change. Unless you are going to make one yourself.

[pugpete1108 62 1 Cars]

for one thing, the mi manifold won't fit the 8v head. For two you want gsxr bodies from 2001-2003 as they're individual, later bodies became joined.

 

You'll probably want to speak to bogg brothers about a manifold, but don't expect much change. Unless you are going to make one yourself.

 

 

they got a website by any chsnce? cheers guys , it hink this is going in two different forums lol

pete

 

guess i am prety buggeed as this was supposed to be a budget build ( apart from the management side of it)

[DrSeuss 0]

If its got tits or tyres it'll be expensive.