Guest eddscruff Posted January 27, 2006 I'm going to fit a recon 309 rear beam to my 205, is it worth doing the driveshaft as well? Any problems if i do? Cheers Share this post Link to post Share on other sites
Sandy 191 Posted January 27, 2006 Only if you fit 309 lower amrs, otherwise they will knock badly. Share this post Link to post Share on other sites
Ahl 4 Posted January 27, 2006 If you do a search on 309 wishbones, then you should find thats its all good! I like mine, a lot. Share this post Link to post Share on other sites
jonD6B 0 Posted January 27, 2006 How much difference is there in the track width on the front and back between the 205 and 309? (sorry to hijack the thread). Share this post Link to post Share on other sites
Guest eddscruff Posted January 27, 2006 hehe, no worries mate. 15mm on front i heard. Share this post Link to post Share on other sites
jonD6B 0 Posted January 27, 2006 Probably 15mm on the back aswell then? Is the 309 uprated aswell as wider? Share this post Link to post Share on other sites
Anthony 1,003 Posted January 27, 2006 From memory, front is approx 10mm per side, and rear is approx 50mm wider. A search will confirm the figures. Share this post Link to post Share on other sites
