Jonmurgie 2 Posted January 23, 2006 Just sorting out a few more things on my Jenvey install and had a few questions on the Fuel Pressure Regulator... Reading Dave's article on the main site he used the standard Mi regulator but mentioned 'turning an adaptor'... does that mean if I were to use the standard regulator I'd need to sort out an adaptor or was that just in his application? Would it be easier to get an aftermarket regulator? If so what should I go for? Cheers Jon Share this post Link to post Share on other sites
kate205gti 4 Posted January 23, 2006 emerald supplied me with an aftermarket regulator - flowed to 4 bar - no idea what make/where from but i can take pic if that would help?? Share this post Link to post Share on other sites
Robsbc 0 1 Cars Posted January 23, 2006 (edited) Just sorting out a few more things on my Jenvey install and had a few questions on the Fuel Pressure Regulator... Reading Dave's article on the main site he used the standard Mi regulator but mentioned 'turning an adaptor'... does that mean if I were to use the standard regulator I'd need to sort out an adaptor or was that just in his application? Would it be easier to get an aftermarket regulator? If so what should I go for? Cheers Jon Matt @ QEP sells an adjustable one which is cheaper than the FSE item Emerald sells. Surprised u didn't notice seeing you created Matt's new web page for the KMS? Edited January 23, 2006 by Robsbc Share this post Link to post Share on other sites
Jonmurgie 2 Posted January 23, 2006 LOL.. well I 'personally' didn't do that site, one of my employees did Nice one though, will call Matt in the morning and get one of those then Share this post Link to post Share on other sites
