Kenballs 0 Posted October 13, 2005 I tried to order an mi16 clutch kit from Peugeot because I'm doing a conversion at the moment but they say they need the chasis number of the mi, which I don't have because I only have the engine. They also say there's two different types of release bearing. The engine is the earlier alloy block type and I'm using my own 1.9 8v gearbox, does anyone know exactly what part no.s I require so I can get it ordered, it would be much appreciated. Cheers, Ken. Share this post Link to post Share on other sites
M@tt 77 Posted October 13, 2005 Paul from 205parts does brand new Mi16 clutches very reasonably he's got one up on ebay at the minute http://cgi.ebay.co.uk/Peugeot-1905cc-mi16-...1QQcmdZViewItem he's also on the forum as 205turbo have a word with him HTH Matt Share this post Link to post Share on other sites
Kenballs 0 Posted October 13, 2005 Paul from 205parts does brand new Mi16 clutches very reasonably he's got one up on ebay at the minute http://cgi.ebay.co.uk/Peugeot-1905cc-mi16-...1QQcmdZViewItem he's also on the forum as 205turbo have a word with him HTH Matt I'll do that, thanks a lot Matt Share this post Link to post Share on other sites
Kenballs 0 Posted October 13, 2005 Turns out I still don't have permission to e-mail other members, grrr.. Maybe he'll see this and give me a shout. Share this post Link to post Share on other sites
Bonzai 2 Posted October 13, 2005 you should be able to pick up a general Mi16 clutch from a local motor factors. just say what car its from, i.e the year of the 405 the engine came from... mine cost £60something Share this post Link to post Share on other sites
Ahl 4 Posted October 13, 2005 Turns out I still don't have permission to e-mail other members, grrr.. Maybe he'll see this and give me a shout. You should be able to use the Private Messenger Ken. Share this post Link to post Share on other sites
Kenballs 0 Posted October 13, 2005 You should be able to use the Private Messenger Ken. Didn't know I could do that but cheers Ahl, I'll give it a try later. Ken. Share this post Link to post Share on other sites
whizzer71 0 Posted October 13, 2005 Depends on the year of your 205,upto 88/89 be1 gearbox early type,be3 89> later type,GSF do clutch kits mail order at a very reasonable price,or alternativley you local motor factor,go for a Valeo or Luk clutch,valeo being oe,luk being nxt best thing. Good Luck Tristan. Share this post Link to post Share on other sites
Miles 331 1 Cars Posted October 13, 2005 Well as your using the old 1.9 box you will need the Mi clucth (215mm) as this fit's onto the flywheel and if your car uses the older BE1 (lift reverse) box you'll need the early release bearing to suit the clutch arm Share this post Link to post Share on other sites
littlemike 0 Posted June 25, 2006 I've got a nearly new Luk Mi16 clutch that came out of a Be1 gearbox. If I get a Be3 release bearing will I be able to use it in a Be3 gearbox or is either the pressure plate or friction plate slightly different between be1's and be3's? Thanks Share this post Link to post Share on other sites