Guest ashnicholls Posted August 16, 2005 are the gear rod linkages on base models the same as on the gti models. car in question is 309 1.1 being converted to xu engine. cheers. Share this post Link to post Share on other sites
Guest ashnicholls Posted August 17, 2005 why not, if my car is lift up reverse. and the gti box i have is lift up reverse, and looks similar on the outside????????? Share this post Link to post Share on other sites
Ahl 4 Posted August 17, 2005 Because the cars have different gearboxes!!!!!!!!!!!!!! The rods are same type, but chances are they are the wrong length. You might be able to adjust them a bit. Im sure someone knows if they can be made to fit or not. Share this post Link to post Share on other sites
Guest ashnicholls Posted August 18, 2005 ye i know they are diff inside, but if the box looks the same on the outside then surely the rods should be the same. so you all think i need new rods?????????? Share this post Link to post Share on other sites
niklas 1 Posted August 18, 2005 (edited) The rods are different, so is the gear change mechanism. One of the rods are going on the other side of the exhaust compared to the GTI model. EDIT: "gear change" = lever Edited August 18, 2005 by niklas Share this post Link to post Share on other sites
Guest ashnicholls Posted August 18, 2005 oh no thats something else i have to buy Share this post Link to post Share on other sites
Guest ashnicholls Posted August 19, 2005 so what will i need, the rods and the l shaped lever in between rods and gearbox??????? Share this post Link to post Share on other sites
Guest ashnicholls Posted May 28, 2006 can anyone answer this, if i bought a set of rods of miles, what else would i need, the L shape lever, which you lengthen to shorten the throw? Share this post Link to post Share on other sites
sonofsam 5 Posted May 28, 2006 3 x rods, plus L shape lever wich you can get from the scrap yard for a couple of quid. Shorten it to shorten the throw. ie quickshift do you mean. Also is your subframe pivot point going to be different? Share this post Link to post Share on other sites
Guest ashnicholls Posted May 28, 2006 ok cheers, Also is your subframe pivot point going to be different? i dont know you tell me. Share this post Link to post Share on other sites
Guest ashnicholls Posted June 5, 2006 Is my subframe pivot point going to be different? has anyone got any of these parts? cheers Share this post Link to post Share on other sites
Guest ashnicholls Posted June 8, 2006 http://cgi.ebay.co.uk/PEUGEOT-205-PHASE-2-...1QQcmdZViewItem would these fit, are there any differences in the rods between 205 and 309 and are there any differences between be 1 and be 3. cheers Share this post Link to post Share on other sites
