pugbliss 0 Posted March 7, 2004 after you take the lense off i.e to get to the bulbs how do you get the body casing off??? the reason i ask is that im having a few probs with the bulbs and i think its corosion and would like to take them out to clean up. can anyone tell me how to take them out/off cheers Share this post Link to post Share on other sites
hd_andy 2 Posted March 7, 2004 Are you talking about the bulb holder? If so there is a 10mm nut holding it to the body, access is in the boot Share this post Link to post Share on other sites
pugbliss 0 Posted March 8, 2004 cheers ill have to look but off hand i carnt remember ever seeing 1 there. Share this post Link to post Share on other sites
Batfink 201 Posted March 8, 2004 If I remember rightly its not an easy screw to get to Share this post Link to post Share on other sites
pacey205 2 Posted March 8, 2004 Piece of piss if you ask me. Passenger side peel back the carpet on the side of the boot to get acces to the hole behind, 10mm socket on small extnesion bar, feel socket onto the bolt and then unscrew. Drivers side is the same except you have to remove the rear washer reservoir. HTH Michael Share this post Link to post Share on other sites
pugbliss 0 Posted March 9, 2004 Mmmmmmmmm ill have a look on wed nesday then?? cheers all Share this post Link to post Share on other sites
