Be3 release bearing sleeve/guide

[TALBOT sport 0]

Hi

 

I´m doing some service on be3 from mi16. Box is stamped -91.

I will replace the sleeve on inputshaft.

 

i have the earlytype 2105 17 . Its sealed with thin paper gasket. Cant find it on sites like autodoc/mister auto

i see the later box has part-number 210535 and that is available aftermarket. it has some preapplied rubbergasket according to pictures.

 

Are these numbers/variants interchangeable?

The basic design looks very similar. Maybe someone has practical info.

 

 

[welshpug 1,661]

Yes they are interchangeable, you will need to check the bearing preload.

[Leslie green 111]

You just replace the rubber seal inside it and the paper gasket no need to replace the whole thing 

Edited December 14 by Leslie green

[Leslie green 111]