Coolant hose routing

[mmt 15]

Hi Guys, 

My oli is running hot. Want to run both the original Oil/water heat Exchange and an aftermarket Air/oil cooler(on top)
 

Can I T the second coolant hose from the heat Exchanger directly into the expansion tank? 
 

thanks

 

 

Edited October 28 by mmt

[welshpug 1,657]

What do you call hot?

[mmt 15]

130-140 c. 

[petert 586]

Why would you run both? I run the AC remote filter mount with a 13 row oil cooler. As do my racing friends here in Aus. In winter, we have to cover up the oil cooler. In summer, 100-110ºC is the norm. That is for dry sump. For a wet sump, you'll need a 15 row cooler.

Edited October 29 by petert

[mmt 15]

45 minutes ago, petert said:

Why would you run both? I run the AC remote filter mount with a 13 row oil cooler. As do my racing friends here in Aus. In winter, we have to cover up the oil cooler. In summer, 100-110ºC is the norm. That is for dry sump. For a wet sump, you'll need a 15 row cooler.

Thanks Peter, I run a 13 row PWR (Aussie) Oil cooler and wanted to add extra cooling capacity by adding the original heat exchanger. Rather have too much cooling and reduce than having too little. 
 

where are you meassuring the temp? I run a sensor in the front og the Oil pan. Is there a “more right” or better place to messsure the temp? 

Edited October 29 by mmt

[petert 586]

in the front of the oil pan is correct for a wet sump. I run it on the block inlet, between oil pump & filter.

[mmt 15]

Thanks. 
 

anyone on coolant hose routing? 

[SRDT 175]

Try something like that:

[mmt 15]

Thanks mate.