Autodoc - is this the correct 1.9 GTi hub

[Ant 2]

Hi,

i want to freshen up my 1.9 hubs. i need to order a load of stuff anyway so thought id add these to the order.

 

Can anybody please confirm if these are correct. Auto doc aren't the most helpful.

 

bearings

 

https://www.autodoc.co.uk/optimal/2014872

 

Hubs

 

Autodoc say its this one

 

https://www.autodoc.co.uk/ridex/8055024

 

i can skeptical, as it shows its compatible to all the models and the 1.9 had more splines

 

this one has 25 splines, but Autodoc says its the incorrect one

 

https://www.autodoc.co.uk/ridex/8054556

 

has anybody ordered / knows the correct one.

 

thanks

 

 

 

[welshpug 1,657]

you want to go for a better brand than those, always try and go for a tier1 manufacturer where possible, i.e a company that supplies the vehicle manufacturers

 

for a 1.9 gti with 82mm bearing this SNR/NTN would have been fitted in the factory.

 

 

https://www.autodoc.co.uk/snr/1929004

 

 

https://www.autodoc.co.uk/meyle/2117238#wheel-hub

 

 

meyle is a well regarded brand, as is Febi.

 

https://www.autodoc.co.uk/febi-bilstein/1871896

[Ant 2]

Thankyou very much Welshpug.. ill order now

[jord294 92]

Snr bearings and meyle flange

[Spesh 31 1 Cars]

Stay away from the FEBI flange they carry, I replaced mine recently and the taper on the inside didnt match OE driveshafts costing me a set of wheel bearings. 

[Ant 2]

Thanks for the replies.. Ive added SNR and Meyle to the basket.

 

Random unrelated question to above - but still hub related.

 

Can a base model bearing and flange be fitted to a 1.6 GTi hub casting ? - to get the same offset as the base model / 1.9 GTi but using the 1.6 casting.

 

thanks

 

 

[SRDT 180]

The 1.6 hub carrier is a regular one, the hub itself is the only special part.

[Gohn 68]

10 hours ago, Ant said:

Can a base model bearing and flange be fitted to a 1.6 GTi hub casting ?

yep, I did that

as mentioned by SRDT, the hub carrier for base model and 1.6GTi is the same,

both take the 72mm bearing hub

I wasn't happy with my 1.6Gti hub and brake (bendix) setup so 

pressed out the deep offset 1.6Gti hub, pressed in a base model hub

and put on 1.9Gti vented disks and Girling calipers 

[Ant 2]

thanks.

 

Good info to know