Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Bronius

Troubleshooting SPI TU3M 1.4

Recommended Posts

Bronius

Hey all,

 

Since three years I have a 205 Roland Garros with TU3m SPI. In the past year the engine began pulsing when idling. Sometimes the amplitude gets so high that the engine stalls. The problem seems to get worse under large electric load, e.g. all the lights and window heating on. So far, I have changed the sparkplugs, air filter, idle motor, coolant temp sensor, lambda. What is left is TPS (which is integral part of the throttle body), air temperature sensor and injector itself.

 

To understand better what is happening, I've 'hacked' in the ECU by reading all analogue data with arduino (see the data in the image), however I cannot really make sense out of it. So you can see this oscillatory motion of rpms (blue line). When it reaches peak, the ECU reduces the injection time, when rpms start dropping, it increases the time again. Basically the two are perfectly in the opposite phases.

 

The puzzling part for me is that TPS voltage is constant, which means a constant air intake, which also means that the ECU tries to control RPMs only with more or less fuel. The idle motor, as mentioned before, was replaced, and it is working.

 

Furthermore, lambda values are also of a question. I understand, that it is usually the case that it is oscillating back and forth, because it is a narrow band sensor here, but I would expect maybe a smaller amplitude? Cause here it is doing the full swing. Also, when lambda is at peak (fuel rich), the ECU increases even more the injection time and then lambda drops, which with a constant throttle angle, should give an opposite effect. 

Is my understanding correct? Also, can anyone point me in the right direction what to check more? And why/how the electric load affects the engine work? Any insights/tips would be appreciated :)

 

Thanks

 

TU3M_data.PNG

Share this post


Link to post
Share on other sites
Max Nilsson

Hey Bronius! Are you still there? I just got myself a 205 1.4 (Tu3m). And I need some tips. Let me know if you see this and we'll take it from there. Thanks! /Max

 

Share this post


Link to post
Share on other sites
Bronius

Yep, I am still here. Found out my vacuum advance diaphragm is broken, waiting now for the spare part. Although this will not solve the oscillatory idle motion, but still. What questions do you have? :) 

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now

×