wladimir031 8 Posted March 6, 2023 (edited) Hi i would like to show my ITB work from start to finish.. enjoy I cut my original GTi inlet manifold Testing angle I made vacum colector for Map and steper motor... to work with oem Ecui instal saab 2.3 turbo injectors (370ccm) Edited March 6, 2023 by wladimir031 1 Share this post Link to post Share on other sites
wladimir031 8 Posted March 6, 2023 First try ... idlee excelent on oem ecu. YouCut_20211212_224109876.mp4 1 Share this post Link to post Share on other sites
wladimir031 8 Posted March 6, 2023 i play with tps sensor because i must use stock gsxr tps .. and then i try again with some trottle. VID_20220510_172452.mp4 Share this post Link to post Share on other sites
wladimir031 8 Posted March 6, 2023 and finaly ROAD TEST.. use headphones hahha sounds great YouCut_20220626_104510688.mp4 1 1 Share this post Link to post Share on other sites
Spesh 31 1 Cars Posted March 7, 2023 Nice Did you get a wideband on it to check the fuelling is ok? Share this post Link to post Share on other sites
wladimir031 8 Posted March 7, 2023 47 minutes ago, Spesh said: Nice Did you get a wideband on it to check the fuelling is ok? nopee .. i only tested ... now i waiting for standalone ecu . Share this post Link to post Share on other sites
Zetec7 4 Posted March 9, 2023 Great work, I used the same T/Bs on my 2-0L Zetec 10 years back & its running on an Emerald ecu closed loop with no problems. 1 Share this post Link to post Share on other sites
mmt 15 Posted January 1, 2024 Really nice work. Looks mint. are those injectors a straight fit with the 306 rail and connectors? They look just like the original 306 gti6 ones? Share this post Link to post Share on other sites
wladimir031 8 Posted January 2, 2024 15 hours ago, mmt said: Really nice work. Looks mint. are those injectors a straight fit with the 306 rail and connectors? They look just like the original 306 gti6 ones? litle shorter , i cut/shorten and weld rail holder where two 10mm bolt goes .. connectors is the same. Share this post Link to post Share on other sites
mmt 15 Posted January 2, 2024 Great thanks mate. do you by any chance have the part number? thanks again. Share this post Link to post Share on other sites
