LED headlights full beam not working

[AndreMUR 0]

Hi everyone,

Today I installed new LED lights (Mini2 H4). But when putting the contact on the full beam indicator stays on all time.

When I try to turn on full beam the intensity doesn't change at all.

 

Any thoughts on that?

[stewal 8]

The green light is dipped headlights, a blue light is main beam so I suspect the stalk switch is not working: quite common because it is used so infrequently.

 

You could try removing the cowling and spraying proper electrical contact cleaner (not wd40) into the stalk whilst operating it, (it worked for me) otherwise it may need replacing.

[BoxGTi 6 1 Cars]

The contacts in the stalk get worn over time. Had a similar issue with mine. Replaced with another unit and now works perfectly.

Not sure if it would have to do with the LED's that you have installed since they run off lower power. Put the old bulbs back and check if it fixes the issue. Then you would know if it is the bulbs or the stalk.