Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

barneys66

Help identifying original PAS pump

Recommended Posts

barneys66

Evening all - going to be retrofitting PAS to my 1.6 (1.9 engine) targa car, and found this pump in my spares pile.

 

Can someone tell me if it's original and therefore should bolt up?  I know I'll need a different alternator bracket, and possibly more, but thought I'd  start here before compiling the wanted ad.

 

For info it's going to drive a 2.6 Xsara rack, so please jump in now if you don't think they'll be a good match (I used a Saxo electric pump with the Xsara rack in my other car, but want to try a stock pump on this one).

 

Thanks!

 

 

52140415617_891de3a62d_o.jpg

 

52141925195_2bfd7f5822_o.jpg

 

52141439126_c39664c850_o.jpg

 

52141925295_9bc0cc7818_o.jpg

 

52141925325_aee98c1525_o.jpg

 

52141925330_39bbcab32c_o.jpg

 

 

Share this post


Link to post
Share on other sites
DamirGTI

Yes , that'll do (+ two brackets + oil lines and hoses) ... quite a few PAS pumps from other Peugeot/Citroen from that era fits on 205 .

 

I'm driving Xsara 2.4 rack with OE mechanical PAS pump - works like a charm !

 

 

D

 

  • Thanks 1

Share this post


Link to post
Share on other sites
barneys66

Thanks Damir!

 

I've got the reservoir and its bracket, and will get the pipes made, but do you have a pic of the alternator/pump bracket(s), and/or the tensioner - am I right in thinking the alternator tensioner is different between car with/without PAS?

 

Edited by barneys66

Share this post


Link to post
Share on other sites
DamirGTI

You can use petrol 405 hard press. oil line , fits 205 directly ... return line also 405 or 306 if using 405/306 PAS reservoir , see if there's any 405 XU petrols at the scrappy for spares (or 306 with the 8v XU's) .. even the bog standard 405 1.6 often had PAS .

 

I've mix of 405 and 306 oil lines on mine ... with the 306 PAS reservoir .

 

Tensioner is little bit different , but you already have main long tensioner piece on that pump which stretches from the pump up top to the adjustment bit .

 

Need main alu. bracket which bolts onto the block for the both PAS pump and alternator , and additional smaller bracket which fastens on the pump end and engine block .

 

http://www.miamistu.co.uk/pug/GB/205N/5/57A35A.HTM

 

 

D

 

1100059210.JPG

1100059211.JPG

20171020_153845.jpg

Edited by DamirGTI
  • Like 1
  • Thanks 1

Share this post


Link to post
Share on other sites
barneys66

Thansk again Damir - very, very helpful!

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now

×