Which Master Cylinder And Part Number

[Bally 4]

Hey, a happy and blessed 2004 to everyone, Can anyone tell me the exact peugeot part no. for the 306 master cylinder with four outlets that fits straight into the 205, also do you need the reservoir or can the 205 one fit. Also what is the size, 23.6mm??

 

Thanks, I need to order a new master cylinder, so I might as well go for the bigger one.

[les3002 0]

there isnt a 23.8mm 306 one with 4 outlets its an early 406 non abs one you want not sure of the part number do a search its been covered a while ago

 

theres a 406 one on ebay i saw yesterday

 

youll have to use the 205 resivoir as the 406 one dosnt fit

 

id imagine the 406 v6 has a bigger m/c dont know if it would fit though.

[Bally 4]

Hi, the part no. I found is 4601 J7. Can anyone confirm this please.

[cybernck 403 1 Cars]

there's a part number on here:

 

http://www.205gti.com/techbrakeconvUK.htm

[huxley309 0]

i know its either

4601 f7 or

4601 j7

 

one is the 306gti-6 mc

and the other is the 406 non abs one

 

just go to your dealer and ask which is the 406 one

[Hilgie 16 2 Cars]

This one is the correct 23,8mm w/o ABS 406 one: 4601 G1

 

The 4601 J1 is the same but has wrong connections to the brakeservo.

[Bally 4]

Thanks for all the help, so the one I need is the 4601 G1, Does the reservoir from the 205 fit direct to this?

[huxley309 0]

dont know about the reservoir but theyre only £22 new

Edited January 5, 2004 by huxley309

[pug_ham 245 3 Cars]

AFAIK the reservoir from the 205 doesn't fit the bigger m/c & the 406 reservoir doesn't sit at the right angle (but is still useable) so the best one to go for is the 306 AFAIK.

 

Graham.

[Hilgie 16 2 Cars]

Yes, get the one from Bram's conversion story at 205gti.com (see above link), this will fit the M/C fine.

Or get one from a pre '98 Peugeot Partner/Citroen Berlingo this fits as well.

[Bally 4]

Darn, I already ordered the 406 m/c and the reservoir, when you say it is still usable, explain please. So what is the correct reservoir I need now.

[Hilgie 16 2 Cars]

The reservoir from the 406 cannot be used as the M/C in a different angle in the 406.

[pug_ham 245 3 Cars]

The reservoir from the 406 cannot be used as the M/C in a different angle in the 406.

It can be used, AndyR is using one on his 205, the angle is still OK but getting the reservoir properly filled is harder, the 306 is the better one to use AFAIK.

 

Maybe RHD 406's sit at a slightly different angle.

 

Graham.

[huxley309 0]

as pugtorque said it CAN be used...will be tight but it will fit

 

why? im using one

 

heres the best pic i could find

 

http://pgac-sw.co.uk/images/members/17.jpg

Edited January 10, 2004 by huxley309

[Hilgie 16 2 Cars]

Seems not the way to do it.....get a proper reservoir from a 306 and you'll be sorted.