Identifying cams with no markings

[Richie-Van-GTi 72 2 Cars]

I put 2 cams away wrapped in plastic and wd40, i wrote on the plastic what they were but its disappeared over time.

One cam was soaked in deox before packing away, the other sprayed with wd40.

I can no longer make out the lines on them to identify them. Can anyone help me identify them?

The shinier one looks to have 2 bands between the end 2 lobes.

The duller cam has different bearing journals (wider)

 

[Thijs_Rallye 87 4 Cars]

I think the cam with the two brown markings is a D6B camshaft.

[Richie-Van-GTi 72 2 Cars]

3 hours ago, Thijs_Rallye said:

I think the cam with the two brown markings is a D6B camshaft.

I believe so as well, i have found multiple sources to say that is a D6B and it measures 11.3mm lift

[petert 589]

D6B should be 11.3mm on both lobes. DKZ is 11.3 inlet and 10.3 exhaust. DFZ is 10.3 on both lobes.

[Richie-Van-GTi 72 2 Cars]

3 hours ago, petert said:

D6B should be 11.3mm on both lobes. DKZ is 11.3 inlet and 10.3 exhaust. DFZ is 10.3 on both lobes.

Other cam is DFZ then i believe as both lobes were in the 10's. Unless a 1.6 cam has similar as i was sure i had a 1.9 and a 1.6 cam.

Edited May 25, 2022 by Richie-Van-GTi

[DamirGTI 342]

1.6 cams are tricky to identify .. early ones are easy (chamfered lobe edges) but later 1.6 cams are a bit confusing ..

Also OE identification data lacks all 1.6 cam paint ring markings .

 

I've seen them with the markings on the same spot as the 1.9 D6B cam (like on you're firs pic) , but on 1.6 cams seems like lighter colour paint rings (cream/white) wile 1.9 D6B cams always have darker paint rings (brown) .

 

Seen also some late 1.6 cams with just one brown paint ring mark on/between the 2-nd cylinder in.-ex. cam lobes .

 

Early 1.6 cams are : 10.4 mm

Late 1.6 : 9.7 mm

 

Having or not having "extra lobe" on the distributor end of the cam can also help .. it's used to drive the mechanical fuel pump on non injection models .

 

Neither one of the 1.9 D6B cams which i've seen to this day doesn't have that "extra lobe" on the dizzy end , 1.9 DKZ and DFZ have it ,  1.6 B6D - not sure , but me thinks it does too .

 

D