Camshaft cap / Cam cover stripped thread

[Ashman 8]

Hello

 

The centre bolt that helps hold down the cam cover on my XU5J no longer tightens/grips as the thread has stripped in the camshaft cap.

 

Is it okay to try and re-thread the cap using a Helicoil.

 

Thanks

Ashley

[Tom Fenton 1,542]

Yes, just do it carefully. 

[petert 588]

Or make it M7x1

[Ashman 8]

Thanks

[Leslie green 111]

I got mine welded up as there wasn't much left to thread into and it had cracked . then retapped after ,a piece of copperpipe was clamped on the bearing surface to control the heat and it worked out fine. I ground it down in a pillar drill with a roloc disc .

 

Edited April 24, 2022 by Leslie green

[Leslie green 111]