Driving lights, mounting bolt thread type?

[pugfrank 14 1 Cars]

Hi,

 

I had to cut off one of the nuts securing my driving lights the other day,  want to order some new stainless steel nuts for the pair of lights, am I correct in thinking they are metric fine thread? 

 

Could someone tell me the diameter and pitch of thread please? 

 

Thanks

 

 

[welshpug 1,657]

m10x1.25, nut still Available from Peugeot, its used on a recent van exhaust bracket!

[welshpug 1,657]

7244 k7 is the number

[pugfrank 14 1 Cars]

59 minutes ago, welshpug said:

m10x1.25, nut still Available from Peugeot, its used on a recent van exhaust bracket!

 

55 minutes ago, welshpug said:

7244 k7 is the number

Many thanks Welshpug.

[Tom Fenton 1,541]

It’s worth learning to identify threads yourself. Male threads eg studs or bolts are easy.

An open end spanner is a very easy way to get the diameter.
For the pitch count 10 threads and measure the length. Then divide by 10. It’s easier to be accurate as say 10mm to 12.5mm to 15mm is much easier to read off a rule than 1.0/1.25/1.5mm.

Alternatively a set of pitch gauges is not expensive.

[pugfrank 14 1 Cars]

7 hours ago, Tom Fenton said:

It’s worth learning to identify threads yourself. Male threads eg studs or bolts are easy.

An open end spanner is a very easy way to get the diameter.
For the pitch count 10 threads and measure the length. Then divide by 10. It’s easier to be accurate as say 10mm to 12.5mm to 15mm is much easier to read off a rule than 1.0/1.25/1.5mm.

Alternatively a set of pitch gauges is not expensive.

Top tip Tom, thanks.