Bolt identification

[Mark Morley 0]

Hi all, Great time to get the roof off..only trouble is I need two bolts that hold the bracket at the non pinion end of the starter motor (P and Rohn) to the block. I managed to put these into a safe place,  and guess what; not a scooby where they are.

 

This is where I need your help in identifying the 2 bolt's size, thread etc. They're out of production and an awkward size so I can't order any. I've checked my PSA cd, and although illustrated,  there are no values included. 

 

Thanks in anticipation 

Mark 

[SRDT 175]

It's the infamous M7x100 bolt size, they arn't listed for the 205 but somehow they are for the 309 and 405:

 

http://www.miamistu.co.uk/pug/GB/309F/5/58A20A.HTM

http://www.miamistu.co.uk/pug/GB/405F/5/58A10A.HTM

[pug_ham 244 3 Cars]

You'll be fine to use the car without this bracket fitted, I took it off mine when I did a starter years ago & have never refitted it because the replacement starter had a smaller body without any problems.

 

g