GTI dash on carb model Rev counter connections

[Remi 0]

Hello Guys, 

 

I have a 1.4CJ '89 with GTI dash fitted (bought like this). Can someone help me to make my rev counter work. At the moment it doesn't have any wires at all.  

 

So rev counter has 4 pins, as from the info page found this:

1.

2. Ground [M32B]

3. Revs counter [112]

4.

 

Pin 2 easy to get the ground. 

Where should I connect the pin 3? As the carb version doesn't have the ECU, where the carb models get the rev counter? Will I need to do the mod of the gauge? 

 

Thank you for any thoughts. 

 

 

[DamirGTI 342]

In order to make it work you need :

 

- switched 12V supply

- earth/ground

- coil signal

 

Wire 112 is main tacho signal wire , need to connect it on the coil negative terminal .

 

D

[Remi 0]

57 minutes ago, DamirGTI said:

In order to make it work you need :

 

- switched 12V supply

- earth/ground

- coil signal

 

Wire 112 is main tacho signal wire , need to connect it on the coil negative terminal .

 

D

Thanks Damir, will try on the weekend. 

[Remi 0]

On 2/11/2021 at 4:59 PM, Remi said:

Thanks Damir, will try on the weekend. 

All worked as described. Thank you Damir again. I am happy now to see my rev counter working finally.