Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
Ginerbolox

Sunroof help 205 junior

Recommended Posts

Ginerbolox

My little pug has just started getting a slight leak through the sunroof. The car is a 94 1.7d junior. The sunroof is a britax pop up type. Can anyone tell me if it has drain holes and we're they are located?  Cheers Giner. 

Share this post


Link to post
Share on other sites
stewal

I am guessing that maybe aftermarket in which case there will be no drain holes.

 

its likely to be a perished rubber seal. Some of the aftermarket ones had a means of increasing the pull down force in the handle mechanism so might be worth a look there.

Share this post


Link to post
Share on other sites
Ozymandis
3 hours ago, stewal said:

I am guessing that maybe aftermarket in which case there will be no drain holes.

No they are factory fit, the handle is also arranged for left hand drive and is awkward to use in right hand drive. I have 5 cars with the same roof, they all leak, I tried a new seal that also leaked.

 

I asked the same question and got no replies.

 

I gave up and took the glass out masked it off and put a whole cartridge of sealer on the rubber,cleaned up the excess and now none of them leak.

Do that before your floor rots away.

 

 

Share this post


Link to post
Share on other sites
welshpug

britax popup is not factory fit.

Share this post


Link to post
Share on other sites
Ozymandis
3 hours ago, welshpug said:

britax popup is not factory fit.

Every single 90`s 4dr diesel I have or had, has a Britax pop-up with a LHD handle.The thumb catch works for the passenger not the driver.

There are 6 of them on my drive or in my garage right now, all were fitted as original factory equipment, 3 are juniors and 3 are Mardi Gras.

Peugeot part No 8401.34 SUNSHINE ROOF

 

Share this post


Link to post
Share on other sites
Ginerbolox

Thanks for the reply chaps. going to try a can of that spray and seal. If that doesnt work i think i will follow ozymandis advice and use silicone sealer. Any advice on the silicon sealer method ozy?

IMG_20201004_120029.jpg

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×