75kw lambda sensor replacement buy tip

[HoRSiCZeK 2]

Hi there guys,

 

please does anyone have some tip for right lambda oxygen sensor replacement for 75kw Jetro? This part is quite expensive at CZ, so I was looking for some on ebay, but there is ****ton of them and dunno which choose...

 

If there is any, can someone please post a link for exact part or some ebay verified shop where is good to buy from?

 

Thx for any advice!

[HoRSiCZeK 2]

ofc I am looking for OEM replacement, I do not want to go with some universal oxygen sensor, thats why I am asking

[DamirGTI 342]

OE O2 sensor is from Bosch : 0258003046

 

Around 100EU +/- depending where you're buying and if you have a parts discount ..

 

Bosch , NGK , Denso is what i would look for OEM type with the connectors .

 

Look around here : https://www.autodoc.de/search?keyword=+0258003046

They seem to have the lowest prices ... not sure about ebay , personally i'm not much of a fan buying car parts on/from ebay .

 

 

Anyhow , if you're on the budget , i'd go for the Bosch universal :  0258986502

https://www.autodoc.de/bosch/1149526

Fitted a few of them on various (much modern/engine management demanding) cars and no complains , fuel trims all good up the specs .. only thing to note you really must use the connector supplied in the kit and follow the instructions , do not solder wiring on this sensor .

 

 

D

[HoRSiCZeK 2]

On 9/28/2020 at 10:19 PM, DamirGTI said:

OE O2 sensor is from Bosch : 0258003046

 

Around 100EU +/- depending where you're buying and if you have a parts discount ..

 

Bosch , NGK , Denso is what i would look for OEM type with the connectors .

 

Look around here : https://www.autodoc.de/search?keyword=+0258003046

They seem to have the lowest prices ... not sure about ebay , personally i'm not much of a fan buying car parts on/from ebay .

 

 

Anyhow , if you're on the budget , i'd go for the Bosch universal :  0258986502

https://www.autodoc.de/bosch/1149526

Fitted a few of them on various (much modern/engine management demanding) cars and no complains , fuel trims all good up the specs .. only thing to note you really must use the connector supplied in the kit and follow the instructions , do not solder wiring on this sensor .

 

 

D

thank you very much Damir! you summed everything I needed to know about it ( I was going to ask about soldering in next step ) thx again!